2012 grid pure sine wave 400w Power Inverter
high-frequency transfer smaller volume
Input & output fully isolation
High Compact and light weight
Low power consumption
System Features:
Integrated balance-of-systems components120/240-volt split-phase operation and true sine wave outputUnsurpassed surge capacity - innovative Full Digital Control regulates voltage to prevent a drop during a power surge.Full 200% rated output power is delivered to the loadEfficient, power factor corrected, high-current, multistage battery chargingEasy and inexpensive to install (does not arrive pre-assembled)Local display on inverter shows output power, charge current and battery level, to provide system status at a glanceDesigned for easy field installation with manageable building blocks
User Guide
Installation and connection
Red terminal: Connect DC positive, black terminal: Connect DC negative
AC socket: Connection to the laden
Switch: power properly connected, turn on the switch, the inverter to work
DC input:
Input voltage range: 9.8V to 15.5V / Maximum input voltage: 16.5V
AC output:
Power grid connect
220V AC versions: 190V-250V 50Hz / 110V AC versions: 90V-140V 60Hz
LED indicator:
Red LED: into protection
Red LED: temperature above 70°C, restart automatically after cooling
Green LED: inverter in working order
Notes:
---Please pay attention of the voltage when use the product. The voltage is from 10.5—28V, if is not these voltage the product may broken.
---Recommended Maximum DC input 4AWG cable capable of handling more than 50A of the cable size.
---Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter DC voltage drop caused by wear and tear.
---Connected to a power outlet to provide AC
---Connected solar panels, battery or wind generators DC input DC power supply cable.
---Proposed wind power plant with its own charge controller and load dump.
