high frequency off grid solar inverter pure sine wave with system 600w
solar inverter
high-frequency transfer, smaller volume
high-performance MCU manage
high-performance MOSFET quick driver
solar converter more information as follows :
Electrical Specifications
Model of the pure sine wave system | 400W | 500W | 600W |
DC maximum input power | PDC.max=440W | PDC.max=550W | PDC.max=660W |
DC maximum voltage | VpvDC16.5VDC |
|
|
Operation voltage range | Vpv 9.8V~15.5VDC |
|
|
Maximum output efficient | ηmax>90% |
|
|
Factor of output power | 0.01 |
|
|
show | LED |
|
|
Maximum input current | Ipv.max40A | Ipv.max50A | Ipv.max60A |
AC output power | 400W AC | 500W AC | 600W AC |
AC maximum output power | 440W AC | 550W AC | 650W AC |
Anti-voltage protection | Fuse |
|
|
AC standard voltage range | 105V-135VAC/205V~235VAC |
|
|
AC frequency range | 59Hz~61Hz/49Hz~51Hz |
|
|
Standby power | <8W |
|
|
Under voltage alarm | 9.8-10.5V |
|
|
Under voltage protection | <9.8V |
|
|
Over load protection | >10% |
|
|
short-circuit protection | <1S(restart)>1S(protection) |
|
|
Over voltage protection | >15.5V |
|
|
Ambient temperature range | -25 °C~60°C |
|
|
Humidity | 0~99%(Indoor Type Design) |
|
|
waterproof | Indoor Type Design |
|
|
Notes:
---Please pay attention of the voltage when use the product. The voltage is from 10.5—28V, if is not these voltage the product may broken.
---Recommended Maximum DC input 4AWG cable capable of handling more than 50A of the cable size.
---Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter DC voltage drop caused by wear and tear.
---Connected to a power outlet to provide AC
---Connected solar panels, battery or wind generators DC input DC power supply cable.
---Proposed wind power plant with its own charge controller and load dump
Mechanical Specifications:
weight(N/GS) | 0.9Kg/1.9lb |
size (L x W x H) | 22 x 12.7 x5cm |
installation | Wall hanging |
AC power cord length | 1.8m |
cooling | fan |
showing | 1 red and 4 green LED |